Chevy Enjoy LS 7 Seater or Mahindra Quanto C2? (Deal! Enjoy Packed & Sealed)


Status
Not open for further replies.
#91
350Z

350Z

Core Team
#91
Joined
Aug 10, 2009
Messages
21,637
Likes
7,873
Location
New Delhi
Re: Chevy Enjoy LS 7 Seater or Mahindra Quanto C2?DEAL: Chevy Enjoy packed and Sealed

Vishwas said:
We booked the Base model LS 8 seater which retailed at INR 8,22,447/- They told they don't have 8 seater on stock so the car should come from Pune which will take good 10 days which is also tentative.
Click to expand...
I have missed so much action in this thread nevertheless congratulations Vishwas. Can’t resist for some beautiful snaps with a review now.

Vishwas said:
Planning to put the chevy badge in the steering wheel because it looks very boring, anyone knows where i could get one? Is it available to order online?
Click to expand...
You can make one yourself. Our forum member 'Lucas' designed an impressive Chevrolet bowtie on steering for his Spark: http://www.theautomotiveindia.com/f...k-modification-accessories-27.html#post273793.

Drive Safe,
350Z
 
Thread Starter #92
Vishwas

Vishwas

V10
#92
Joined
May 11, 2011
Messages
4,096
Likes
950
Location
Bangalore
Re: Chevy Enjoy LS 7 Seater or Mahindra Quanto C2?DEAL: Chevy Enjoy packed and Sealed

350Z said:
I have missed so much action in this thread nevertheless congratulations Vishwas. Can’t resist for some beautiful snaps with a review now.


Drive Safe,
350Z
Click to expand...
Thanks Vibhor, review will come up soon after i get my car.

You can make one yourself. Our forum member 'Lucas' designed an impressive Chevrolet bowtie on steering for his Spark: http://www.theautomotiveindia.com/f...k-modification-accessories-27.html#post273793.
Click to expand...
That's great! he's just used the reflective tape to bring that symbol, i shall try that very soon but, i'm worst at drawing, will do some P.S Job and try it.


BTW am planning to add black out stickers for the B and A pillars and ORVM blinkers from Chevrolet accessory dept. Will ask once i visit the showroom once again, the looks very basic in stock condition.
 
#97
Gurrala74

Gurrala74

V12
#97
Joined
Dec 8, 2010
Messages
8,137
Likes
1,790
Location
Hyderabad
@Vishwas

I have just spotted one enjoy on my way, it looks really great man and noise levels also seems to be very less and I liked its model, BUT sorry to say like this just check about that diesel engine issue on Enjoy if that is the same one used for Sail UVA as people are reporting very less FE on some other thread. As this diesel mill not made by Fiat but it is made by GM under collaboration with Fiat.
 
#98
350Z

350Z

Core Team
#98
Joined
Aug 10, 2009
Messages
21,637
Likes
7,873
Location
New Delhi
Re: Chevy Enjoy LS 7 Seater or Mahindra Quanto C2?DEAL: Chevy Enjoy packed and Sealed

Vishwas said:
That's great! he's just used the reflective tape to bring that symbol, i shall try that very soon but, i'm worst at drawing, will do some P.S Job and try it.
Click to expand...
You will not have to draw at all. To make it simpler, just take an impression of logo from steering on a blank paper and cut it. Now place it on 3M to create an exact cut out.

Drive Safe,
350Z
 
#99
sethumurugan

sethumurugan

V10
#99
Joined
Feb 8, 2011
Messages
3,863
Likes
1,169
Location
Chennai
Man it seems it was an action packed thread which somehow I missed.

Anyway, congrats on your new Enjoy and hope you and your family going Enjoy it more. So for our next meet hope you and your enjoy joins us. AND yes, Welcome to CHEVY Family.

Pls post the ownership reviews with lots and lots of pics.
 
Thread Starter #101
Vishwas

Vishwas

V10
#101
Joined
May 11, 2011
Messages
4,096
Likes
950
Location
Bangalore
Gurrala74 said:
@Vishwas

I have just spotted one enjoy on my way, it looks really great man and noise levels also seems to be very less and I liked its model, BUT sorry to say like this just check about that diesel engine issue on Enjoy if that is the same one used for Sail UVA as people are reporting very less FE on some other thread. As this diesel mill not made by Fiat but it is made by GM under collaboration with Fiat.
Click to expand...
It's decent in approach, and yes i am quite skeptical about Enjoy running about freely when its siblings has some kind of problems, but if something gets out of way, then these showroom people will have tough times ahead, because there are already many deliveries gone.

This MJD is jointly made by Fiat and GM, but the tuning was perfect in the enjoy when i test drove it, well there are time we can't tell anything,will see what happens.

350Z said:
You will not have to draw at all. To make it simpler, just take an impression of logo from steering on a blank paper and cut it. Now place it on 3M to create an exact cut out.

Drive Safe,
350Z
Click to expand...
Even better, will try it out once i get the car.

sethumurugan said:
Man it seems it was an action packed thread which somehow I missed.

Anyway, congrats on your new Enjoy and hope you and your family going Enjoy it more. So for our next meet hope you and your enjoy joins us. AND yes, Welcome to CHEVY Family.

Pls post the ownership reviews with lots and lots of pics.
Click to expand...
Thank you Sethu, I'll make it for the meet as much as possible but have some commitments in August, but will work it out to check myself into the meet.

Music_Swift said:
Saw Enjoy last month in Grey Color and saw some Enjoys in different colors.Looks hot in Grey Color.
Click to expand...
Thank you Abhi, sorry i couldn't reply you in FB, i just check updates there that's all.

The Grey Enjoy does look good, but i've had enough mainlining darker colors, so opted silver for its lesser maintenance, never attracts heat and dust and an added advantage while selling along with unseen scratches [:D].

BTW got a ping from Bank that the loan is approved for my car, am eagerly waiting for my SE's call to know when's the car coming to stock yard to do a thorough PDI.

In the meantime, i have ordered for the Chevrolet key-chain from e-bay which cost me 100 bucks.
 
Thread Starter #102
Vishwas

Vishwas

V10
#102
Joined
May 11, 2011
Messages
4,096
Likes
950
Location
Bangalore
Update:

The showroom guys called me to confirm my details and address (maybe for registration purposes), i confirmed everything and asked about the status of my car, the representative took some time and confirmed that my car was in the STOCKYARD!

So i told i would going there right away to do a PDI while the SE called me to confirm the accessories, so i did and off to the stockyard with my dad in our access,

There i saw my buddy and confirmed with the rep there of my car, so then quickly started to check things out, did a PDI with TAI's checklist,found out it was Apr-13 manufactured model thank you Vibhor. Drove it inside the stock-yard and found to slot the 1st gear a little bit hard, will see when the car comes, if problem persists will check with service center people. It was muddy as it had rained in the afternoon.

Told them to send the vehicle for registration on Thursday and asked them to give the delivery on Friday evening considering the auspicious moment.

Took a photo and will upload it in the ownership thread :P
 
Last edited:
Status
Not open for further replies.
Top Bottom