Barricade - Yamaha FZ-16 (2009) - Midnight Black

[deville_56]

As far as I remember, the last time I swapped the hose, I measured the stock one at 31.5 inches (80cm). I’m guessing the Pulsar hose is 75cm, which is why it’s a tight fit.
So far, the 85cm hose is only available from RCB, but unfortunately, that doesn’t come with rubber grommets. I had a very bad experience buying from Amazon, one seller shipped the wrong size, and the other hasn't shipped yet. Given this, I’m now thinking of buying and importing from AliExpress instead.


View attachment 322076 \
View attachment 322075

Check in local accessory shops too. I have seen many in Cochin and way cheaper than Amazon, around ₹450 (I got from Amazon for ₹599 then). Same generic hoses. Not sure about length. AliExpress won't deliver to India nowadays. Rarely some seller do, but at high shipping rates and will definitely get caught by customs, who'd slap another 60-70% as duty. Not worth unless shipping to some other country and bringing in person by some acquaintance.

 

[ansh240]

Check in local accessory shops too. I have seen many in Cochin and way cheaper than Amazon, around ₹450 (I got from Amazon for ₹599 then). Same generic hoses. Not sure about length. AliExpress won't deliver to India nowadays. Rarely some seller do, but at high shipping rates and will definitely get caught by customs, who'd slap another 60-70% as duty. Not worth unless shipping to some other country and bringing in person by some acquaintance.

Already tried in Karol Bagh, and none of the shops there have the right length. The only exception is Moto Planet, which has RCB hoses for ₹2,399, but those come without rubber grommets.
Regarding the import, the only option I have is to order them to my client’s address, and he’ll ship them to me. But since the shipping cost is quite high (3k via Aramex), I’ll have to order 5-6 hoses to bring down the average cost.

 

[ansh240]

UPDATE

Finally found right length (80 cm) for just Rs 250 in Karol Bagh. Went there to grab a fork rod T and oil seal driver. On the way back, I saw a superbike mod shop and thought, let’s ask one last time. And the guy straightaway told me not to ask anyone else and pointed me to an unnamed shop in a narrow busy street. To my surprise, that little shop had all kinds of hoses.
Most of the hoses they had were DOT certified, but I’m not sure if that’s the real deal or just for the name.

 

[deville_56]

2023 August - Fork Oil Leak

LH fork starts leaking.

Went to Muthoot Yamaha for parts. Their labour ₹ 280 x 2 + tax. Turnaround time a day or two depending on the rush.

Bought the stuff.

Fork Oil - Yamalube - 90793-AD803 - ₹ 188.00 x 2
Recommended 10W. 500 ml bottles. Each fork needs 459 ml.

Fork Dust Seal - 4EB-23144-00 - ₹ 299.00
Bought only one. Only one was damaged, other side replaced not so back.

Like always, Ars-HTA brand. Would be some ₹60-70 in their packing.

Model 7794.

Fork Oil Seal - 2GS-F3145-00 - ₹ 356.00 x 2

Again Ars-HTA.

Model 7705. Only ₹65 in their packing. Yamaha charging 5.5 times the original rate (so do RE).

Special Washer - 20P-F3418-00 - ₹ 11.00
For steering. Damaged by the previous guy.

Race Bearing O-Ring - 90202-26142 - ₹ 2.00
Which the previous guy didn't install despite providing new one.

Took to KR Motors for fork seal replacement. Didn't have the tools, should get them soon. Youtube mechanics showing crude ways without proper tool, which I never would wanna try.

Job done.

This is what he is famous for.

Perfect job.

His best stance.