List Of expenses incurred for this project
Alloy Wheels - 11,500/-
Broader Rear Wheel From Pirelli( 140/70/R 17) - 9500/-
Front Gear and Brake System - 6800/-
Swing Arm - 1400/-
Tail Light - 450/-
Fabrication work - 6000/-
Painting ( Two Tone with Pin striping Stickers) - 10,000/- Amber Whisky and Pearl Grey are both pearl base paint hence a bit Costly.
Handle bars - 1100/-
Mirrors - 600/-
Foot Rest Front - 1200/-
Seats - 2250/-
Seat Cover - 1000/- as i had tried three seats including the rear in which one was discarded.
Chrome Plating - 4000/-
Engine,Gearbox casing, Front shocks Polishing Charges - 1100/-
Lathe work - 1000/-
Steel Number plate and rear Indicator holding Assembly - 400/-
Indicators 4 nos - 700/-
Showroom Servicing @ accelerator and clutch cable change - 2500/-
Fuel Tank - 3500/-
Fog Lights - 800/-
Fog light and Front indicator Rod - 600/-
IND Number plate - 550/-
Stickering - 600/-
Mechanic Labor charge - 7500/-
Shipping charges of Handlebar, Saddle bags, swing arm, seats, Alloys& Tyre - 2000/-
Mobile Charger Cable assembly - 350/-
Tyre Fitting charge - 130/-
Bolts & Nuts & washers - 200/-
WB RC Silencer - 3800/-
Saddle Bags - 2500/-
New Exide Battery - 3300/-
Grand Total = 87,330/-
i Feel i saved a lot considering the charge some of the modifiers charge for stage one modification which starts from 1.5 so i just spent a bit more than half of it.
I'm thinking of starting a customizing shop as a hobby for those who want it done for bit less than what these other people charge.
have already got a few customers from our riding group itself, however until now haven't taken any decision.
Alloy Wheels - 11,500/-
Broader Rear Wheel From Pirelli( 140/70/R 17) - 9500/-
Front Gear and Brake System - 6800/-
Swing Arm - 1400/-
Tail Light - 450/-
Fabrication work - 6000/-
Painting ( Two Tone with Pin striping Stickers) - 10,000/- Amber Whisky and Pearl Grey are both pearl base paint hence a bit Costly.
Handle bars - 1100/-
Mirrors - 600/-
Foot Rest Front - 1200/-
Seats - 2250/-
Seat Cover - 1000/- as i had tried three seats including the rear in which one was discarded.
Chrome Plating - 4000/-
Engine,Gearbox casing, Front shocks Polishing Charges - 1100/-
Lathe work - 1000/-
Steel Number plate and rear Indicator holding Assembly - 400/-
Indicators 4 nos - 700/-
Showroom Servicing @ accelerator and clutch cable change - 2500/-
Fuel Tank - 3500/-
Fog Lights - 800/-
Fog light and Front indicator Rod - 600/-
IND Number plate - 550/-
Stickering - 600/-
Mechanic Labor charge - 7500/-
Shipping charges of Handlebar, Saddle bags, swing arm, seats, Alloys& Tyre - 2000/-
Mobile Charger Cable assembly - 350/-
Tyre Fitting charge - 130/-
Bolts & Nuts & washers - 200/-
WB RC Silencer - 3800/-
Saddle Bags - 2500/-
New Exide Battery - 3300/-
Grand Total = 87,330/-
i Feel i saved a lot considering the charge some of the modifiers charge for stage one modification which starts from 1.5 so i just spent a bit more than half of it.
I'm thinking of starting a customizing shop as a hobby for those who want it done for bit less than what these other people charge.
have already got a few customers from our riding group itself, however until now haven't taken any decision.
I am sure about one thing, whenever I do buy a Bullet, will send it across to you to do your magic, my sincere appreciation and applaud
![Clap [clap] [clap]](https://www.theautomotiveindia.com/forums/images/smilies/Clap.gif)
regards
vinod