Honda Amaze VX i-DTEC Ownership Review


Thread Starter #151
Joined
Jul 22, 2013
Messages
1,005
Likes
815
Location
Trivandrum
Problem?[confused] I didn't get you mate?



Actually New Dzire looks grows on you after some time and most would start liking it. I got this comments from many New Dzire owners. But in my opinion old Dzire looked much better and also had a large boot compared to new one. I went for Dzire Tour LDi only because of this reason. 460L of boot space for placing couple of subwoofers and still lots of space left for luggage usage.

I think Amaze has much more powerful engine than Dzire and also is very quick compared to Dzire. But Amaze has terrible interiors not worthy of 9L price tag and Honda's unknown service costs for their first diesel car in India are the negatives. (Parts availability will be another issue)

Regards,
Sankar
i just don't like the turbo lag region[evil] that's it


and well with the availability of parts, as per the showroom guys, they said it won't be taking too much of delay. and yes amaze's interior would've been better [cry]
 
Joined
Mar 9, 2013
Messages
1,623
Likes
94
Location
Trivandrum
i just don't like the turbo lag region[evil] that's it


and well with the availability of parts, as per the showroom guys, they said it won't be taking too much of delay. and yes amaze's interior would've been better [cry]
Availability of parts can be judged only after car gets 1-2 years old in Indian market. Showroom guys have rarely been honest na?[;)]

Regards,
Sankar
 
Joined
Mar 9, 2013
Messages
1,623
Likes
94
Location
Trivandrum
but they promised to give my broken ORVM a guaranteed replacement part within 7 days, and that's why i said so [roll][angel]
A friend of mine had a different experience sourcing parts for his Jazz. His car had met with a minor accident and it was in service center in Trivandrum for more than 2 months due to unavailability of certain parts. Situation might have changed now. Don't know as i have never been to their showroom so can't comment about it myself.

Regards,
Sankar
 
Thread Starter #155
Joined
Jul 22, 2013
Messages
1,005
Likes
815
Location
Trivandrum
A friend of mine had a different experience sourcing parts for his Jazz. His car had met with a minor accident and it was in service center in Trivandrum for more than 2 months due to unavailability of certain parts. Situation might have changed now. Don't know as i have never been to their showroom so can't comment about it myself.

Regards,
Sankar
Maybe [:)]
 
Thread Starter #157
Joined
Jul 22, 2013
Messages
1,005
Likes
815
Location
Trivandrum
DIY on Broken ORVM Indicator

Had Once Posted about my ORVM indicator being broken by a stupid truck Driver on his carelessness and was trying for a permanent way out of it without actually getting the ORVM replaced by shelling some K's of money and finally it ended up in another DIY :cool:

As i was Doubhtful about the warranty norms , first i went to svc to make it clear that nothing will happen to my warranty and later asked themselves for removing the ORVM cap

DSC_0087.jpg

DSC_0088.jpg

DSC_0089.jpg

DSC_0093.jpg

The Broken ORVM indicator

DSC_0094.jpg

DSC_0095.jpg



Tools Required :


Flat File Tool

DSC_0096.jpg

M - Seal

DSC_0097.jpg

Foam Board

DSC_0098.jpg

Spray Paint Can

DSC_0101.jpg

Water Paper for sanding and shaping M - Seal

DSC_0102.jpg


Let The Work Begin :


Clean the surface of the ORVM with cotton waste
2013-08-28 17-49-46.jpg

Place the Foam Board in the Broken Area

2013-08-28 18-02-10.jpg

Use duct tape to wrap it around

2013-08-28 18-03-31.jpg

Place The M -Seal on the Foam Board , try shaping it to the surface of the indicator

2013-08-28 18-11-24.jpg

2013-08-29 12-02-16.jpg

2013-08-29 12-02-29.jpg

Apply first layer of Primer coating

2013-08-29 12-05-39.jpg

Wait till it get's dry

2013-08-29 13-16-32.jpg

2013-08-29 13-16-42.jpg

Remove the Duct Tape and shape M-Seal using the Flat File Tool

No Pictures of the shaping process because my hand was too dirty[;)]

2013-08-29 13-26-56.jpg

Seal it with Duct Tape again and Spray another Layer of Primer Coating

2013-08-29 13-32-11.jpg

Finally Color it with your desired color :tongue:
Here I've used black so that it won't be an eyesore


2013-08-29 15-15-11.jpg

Remove the Duct Tape

TADAHHHHH !!

2013-08-30 12-47-27.jpg
 
Last edited:
Joined
Jul 10, 2013
Messages
281
Likes
187
Location
AP
Nice to see atlast this ORVM is going to be fixed. You are doing great job and giving inspiration to many people. Heartiest congrats vishnu vichu and looking forward to final pics. [clap]
 
Thread Starter #162
Joined
Jul 22, 2013
Messages
1,005
Likes
815
Location
Trivandrum
DIY on Broken ORVM Indicator

Now Fixing The Indicator back to ORVM

Remove the Mirror and unscrew all the screw's

DSC05671.JPG

Remove the ORVM cap

DSC05677.JPG

DSC05679.JPG

Place the Indicator and screw it

DSC05680.JPG

DSC05681.JPG

DSC05682.JPG

Place the Mirror

DSC05683.JPG

To make it look good, i've stickered the other ORVM's indicator and painted the stickered portion in the same colour[clap]

DSC05684.JPG

Do the Same Procedures

DSC05685.JPG

Apply Colin to avoid bubbles while stickering

DSC05687.JPG

Here i've used Orange Sticker's since anyway it's to be painted black[;)]

DSC05692.JPG

DSC05693.JPG

DSC05694.JPG

DSC05695.JPG

DSC05696.JPG

DSC05697.JPG

Mask it well before spraying the paint

DSC05698.JPG

DSC05699.JPG

DSC05700.JPG

DSC05702.JPG

Here i've used archilles black

DSC05703.JPG

DSC05704.JPG

More pictures will be uploading soon[:)]
 
Joined
Sep 9, 2013
Messages
4
Likes
0
Location
Coimbatore
Hi,

It is really amazing to see you posting.
I Just want your views on the maintanance and servicing cost of the Honda Brand. Many confuse me about the high pricing when compared to Maruthi...
Please guide me wih your valuable views.

Thanks
 
Top Bottom