New Tata Safari MT Jerking in First Gear

[Priyank.shishodia]

Hello everyone. I have tata safari 2021 manual bs6. Odo reading is 46000. When my car heats up little after running 10 km, the car shakes a lot in taking u turn or picking up in first gear. Otherwise in all gears the car picks up speed normally, what could be the reason?

 

[anuraagshenoy]

Hello everyone. I have tata safari 2021 manual bs6. Odo reading is 46000. When my car heats up little after running 10 km, the car shakes a lot in taking u turn or picking up in first gear. Otherwise in all gears the car picks up speed normally, what could be the reason?

Bleed the clutch line (same brake fluid) that goes from the master cylinder to the slave cylinder located on the gearbox. Bleed it properly and see if that solves the jerking issue.

 

[Redex]

Hi,
Does the juddering happen when you have your foot off the clutch pedal or is it while you are engaging the clutch ?

 

[rajanmodak]

Hello everyone. I have tata safari 2021 manual bs6. Odo reading is 46000. When my car heats up little after running 10 km, the car shakes a lot in taking u turn or picking up in first gear. Otherwise in all gears the car picks up speed normally, what could be the reason?

Hi Priyank, Was wondering if you managed to figure out the issue and got it resolved? I am also facing same and TMSC are as usual clueless. I don't want to they spoil something else in verge of fixing this issue. Appreciate your response.

Hi,
Does the juddering happen when you have your foot off the clutch pedal or is it while you are engaging the clutch ?

Hi Redex, for me it typically happens after driving for 10-15 kms in city mostly.... when car is not in motion, picking it up on 1st gear, it jerking.... from 2nd gear its fine. next day same thing... for 10-15 kms it works fine... then it jerks.

Bleed the clutch line (same brake fluid) that goes from the master cylinder to the slave cylinder located on the gearbox. Bleed it properly and see if that solves the jerking issue.

How to do this? I am sure these TMSC wont have any clue how to do it, i am worried they don't make something stop causing more issues.